2006 Honda Accord Factory Fog Lights

At first glance, these fog light appear very nicely made and there are things about them that are absolutely top notch, but there are warts. The first complaint is one common to all the various vendors of 2006-2007 Accord fog light kits and that is the wiring harness. They have all gone cheap and now include a "universal" harness and a cheap 3rd party switch that does NOT match the OEM fit or appearance. The "universal" wiring harness was a toss item other than the section that connects the fog light at the front of the car which I was able to incorporate into the OEM based under hood harness I had to create. The next wart is the installation hardware (ie screws, etc) was missing the spring nuts (2ea side) Then I realized that the fog light aim would NOT adjust. The housing pivot points are set too far back, pushing the bulb housing against the trim bezel with NO clearance for adjustment (flaw in housing design). Removing the plastic trim from the housing lens created sufficient clearance. Related to this, they assembled the aiming screw COMPLETELY wrong with the screw on the front of the plastic bezel access hole rather than behind it. The problem was easily fixed with the simple addition of a couple of small flat washers. Now the plus side, the mounting hardware is heavy gauge powder coated steel and is OEM fit and finish. The plastic trim bezel is high quality and an exact fit. I ordered the smoke lens (glass BTW) and they are exactly as I desired . The bulb housing is heavy metal and the lens is glass. I also applied a thick, self healing, protective film over the glass lens as a precaution to rocks cracking the glass lens. So, it might seem that I found WAY more wrong than right with this kit, but that is not really the case. I had the opportunity to compare to a couple of other similar kits and this one is simply better constructed, even with the warts.